Home Products Networks / Communications Communication Gateways

AB7508

ABX-PIR2-PDPS Anybus X-gateways


Anybus X-gateway - PROFINET-IRT Device - PROFIBUS Slave


Price Per 1   £754.00

Routeco stock: 0
Non-Returnable Product
Please login or register for trade pricing.

Associated Products
^ denotes Non-Returnable Product.



Technical Specification
Depth144 mm
Front installation possibleyes
Height127 mm
IO link masterno
IP-ratingIP20
Rack-assembly possibleno
Rail mounting possibleyes
Supply voltage DC24...24 V
Supporting protocol for Data-Highwayno
Supporting protocol for DeviceNet Safetyno
Supporting protocol for DeviceNetno
Supporting protocol for EtherNet/IPno
Supporting protocol for MODBUSno
Supporting protocol for other bus systemsyes
Supporting protocol for PROFIBUSno
Supporting protocol for PROFINET IOno
Supporting protocol for TCP/IPno
Voltage type of supply voltageDC
Wall mounting/direct mountingno
Width44 mm
Features and Benefits
  • Fast copying of cyclic I/O data between the two networks (10-15 ms)
  • Proven and tested with all PLC manufacturers
  • Supports up to a maximum of 512 bytes of Input and Output data in each direction
  • Possibility to build web pages displaying and controlling a factory floor process with data from the other connected network
  • Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
  • Optional control status information added to I/O data for diagnostic purposes
  • Robust stand-alone housing for use in harsh industrial environments
  • Global free technical support and consultancy
  • PROFINET IRT Device/Slave interface
  • PROFINET IRT Device/Slave settings can be made either via the built-in web interface, or by importing the provided .GSDML file into engineering tool of the controlling PLC.
  • Complete PROFINET RT and IRT functionality specification 2.3
  • Conformance tested supporting Class A, B and C
  • Max 220 bytes of Input and 220 bytes of Output data
  • Baud rate 10/100 Mbit/s Isochronous cycle times 0.25 to 4 ms (25 Us increments)
  • SNMP-MIBII support
  • TCP/IP Configuration via DCP (Discovery and Configuration Protocol)
  • LLDP (Linked Layer Discovery Protocol)
  • Support for I&M (Identification & Maintenance)
  • PROFINET uplink configuration via .GSDML file
  • Dual port cut-through switch
  • Dual RJ-45 ports available simultaneously
  • PROFIBUS Slave interface
  • PROFIBUS Slave settings can be made either via on-board switches, or by importing the provided .GSD file into engineering tool of the controlling PLC.
  • Complete PROFIBUS-DP/DPV1 Slave functionality according to extensions of EN 50170
  • Supports Class 1 & Class 2 services
  • Automatic baudrate detection up to 12Mbit/s
  • Max. Cyclic I/O data 244 bytes Input and 244 bytes Output, max 344 bytes total (in+out)
  • Acyclic User Parameter data / Diagnostics length - up to 237 bytes
  • Supports PROFIBUS features: Sync and Freeze and Watchdog
  • PROFIBUS slave settings via on-board switches or vis .GSD file
  • 1x D-sub 9-pin female PROFIBUS connector
Resources / Data Sheets
Technical Data


IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.