Home Products Programmable Controllers ControlLogix - Large Systems

HI1756-2WS

WEIGH SCALE MODULE DUAL SCALE

Weigh scale module. Dual channel

Price Per 1 £4,211.72

Routeco stock: 0

Non-Returnable Product

Add to basket Pricing/Availability request

Please login or register for trade pricing.

Associated Products

^ denotes Non-Returnable Product.

Technical Specification

Flux controller possible	no
Height	18.39 mm
Redundancy	no
Single-axis controller possible	no
Single-axis positioning possible	no
Suitable for cam controller	no
Suitable for CNC	no
Suitable for counting	no
Suitable for detection absolute value	no
Suitable for electronic position measuring	no
Suitable for flux measurement	no
Suitable for flying saw	no
Suitable for incremental data detection	no
Suitable for multi-axis control	no
Suitable for multi-axis positioning	no
Suitable for NC	no
Suitable for path controller	no
Suitable for pressure control	no
Suitable for safety functions	no
Suitable for SSI	no
Suitable for temperature control	no
Suitable for weighting	yes
Suitable for welding control	no
Width	17.9 mm

Features and Benefits

The HI 1756-WS conditions and digitizes the weight signal 110 times per second with over one million counts of resolution over a differential signal range of 0 to 15mV. It then transmits the selectable Gross, Net and/or
Rate-of-Change data to the processor. This high resolution allows the module to tolerate large dead loads and over sizing of the load sensors while retaining a high level of usable resolution. The module supplies 5 volts of DC
excitation to drive up to four 350 ohm load sensors or load cells associated with a single (-WS), or eight load cells associated with a dual (-2WS) scale. It will support additional load cells with an external power supply.
ADD-ON-PROFILES & FACEPLATE/AOI
Hardy’s pre-programmed and pre-tested integration tools can reduce development time by 50 to 90%. Using a combination of Add-onProfiles
(AOPs) and SE and ME HMI Faceplates with Add-on-Instructions, creates a synergistic method for EASY and seamless integration for weighing with Rockwell Automation PLCs/PACs using RSLogix® and Studio 5000®. The HI 1756-WS supports the use of the producer/consumer technology in the ControlLogix system to transmit data. This type of communications is an intelligent data exchange in the system where the module produces data without having to be polled.
Two or three bi-color LEDs on the module’s front panel report functional characteristics. Being a true ControlLogix module the HI 1756- WS supports removal and insertion under power.
C2® ELECTRONIC CALIBRATION
C2 enables electronic calibration of the weigh system without test weights. This saves system start-up costs and aggravation. Of course, even
if C2 certified load sensors are not used, the system can still be calibrated the slow, traditional way using certified test weights.
WAVERSAVER® eliminates the effects of unwanted plant vibration on or around the scale by permitting the weigh module to “see” through the unwanted vibration signals - as low as 0.25Hz - while yielding a stable actual reading.
INTEGRATED TECHNICIAN® used in conjunction with an IT Junction Box, provides built-in system diagnostics that enable you to troubleshoot and diagnose your weighing system. You can read individual load sensor voltages and weights, make comparisons, and isolate individual system components for quick and easy troubleshooting

Resources / Data Sheets

Technical Data

User Manual

Certificate of Conformity

Technical Drawing

IMPORTANT: Please note that all product information, associated resources and links to third party websites contained within our website have been prepared solely for the purpose of providing general information only. All information is provided in good faith as a convenience to you and may be used for information purposes and guidance only and at all times in accordance with our Terms & Conditions of sale. Due to the reliance on third party data, we are unable to guarantee that the content on our sites is accurate, complete or up-to-date at any given time and it is recommended that if you are unsure if a product will fulfil all of your requirements that you always seek specialist advice from your local Routeco branch before making your selection.